Drapey Jersey Shirt

I saw this tutorial the other day and new instantly that it would be a hit with Abby. She needed a shirt to go with a skirt that I made for her last week using my reconstructed denim skirt tutorial. The only thing I did differently is I serged the edges with a roll hem stretching as I sewed so that it would make it ruffle. We are both really pleased with the end product.

Reconstructed Denim Skirt

Things you need: A pair of jeans that fit, sharp scissors, pins, heavy jeanstitch or topstitching thread, denim/jean needle, and of course a sewing machine.



First thing is to decide where you want to cut your pants off at. I decided I wanted mine cut off at the knee. I plan on adding a ruffle or something to the bottom.


Then split the inside seam of the leg.


Next, cut off the inside seam of the inner legs.


Split the back crotch up far enough so that when you lay the curve down it lays flat without any puckering.


Pin in place. It's best to stitch along the seam that's already there in a matching thread color.


If your pants have a deep crotch you may have to split some of the crotch seam in the front and lay it flat as well. Pin it in place and stitch like you did the back crotch seam.


Next take your leg pieces that you cut off and open one of the side seams.



Slide the leg under the open V where you split your leg seam on your garment. I turned my legs upside down since they were tapered. Pin it in place. (At this point if you do not want raw edges you can trace the shape on to your piece and add a seam allowance and then stitch your right sides together. Personally I like a little fraying so I just left it like this.)

Now take it to your machine and stitch along the edges of your fabric where it's pinned.


Once it's stitched you can trim off the excess fabric.



You can shape the bottom now. I wanted mine to come to a point in the middle and I also wanted it slightly longer in the back than the front. You could leave it just like this (though I would run a line of stitching about 1/2" away from the raw edge to keep it from fraying too far) or you can add a ruffle or something. I'm still trying to decide what I want along the edge of mine so I'll post a final pic when it's complete.

ETA: finished pic!

Blah Jeans, cute fabric = Super cute skirt

The thing about having children with long legs and skinny waists is they grow out of their pants in length before they grow out of the waist. What a waste to throw those away right? Well, tonight after doing my ruffle tutorial and saying something about how cute it would be on a denim skirt, I just had to try it. Cue Hannah's drawers... Found a pair that were too short but we are still cinching the waist with the built in elastic and buttons (man I love pants like that!)

This print is from the Heather Ross Lightening Bugs and other Mysterious things. It's out of print now which is sad. I've never loved a fabric collection quite like that one.

I chopped the pants off at the knee and split the legs. I also had to split up the back of the butt and stitch it down to make it lay flat. I took what was left of the leg, cut it open and attached it to the v left from cutting the pants open. Attached a ruffle and now she has a cute skirt. And of course who would I be if I didn't make her a matching headband and flower to go with it. :)


Hopefully tomorrow we can get an action shot. She's going to flip when she sees this tomorrow.

I think it's safe to say she loves it.

Gathering

It's one of my most hated tasks ever. I shy away from garments with ruffles/gathers because I simply can't stand sewing them. I have a ruffler foot for my machine but can't stand it even more then I can't stand gathering. I put together a quick little tute for a friend (and my mom, Hi mom!) so that it's easier to understand a method that I found works great for getting your gathers spaced a little more evenly and keep them from getting caught in the seam like mine use to.

Lengthen your stitch to the longest length and set your tension to 0 (it's very important to make sure you set your tension to 0 otherwise you won't be able to pull the bobbin thread). Stitch two parallel lines down the length of your gather/ruffle being sure your seam allowance falls between the two sets of stitches.

Pull your bobbin thread up gathering your fabric as tightly as you need it.

Pin, pin, pin. Those that know me know how much I hate using pins but they are a necessary evil when gathering. I also wrap my bobbin threads around the pins on the end to keep it from unraveling and losing the tension in my gathers.


Stitch using your seam allowance and then remove your bobbin threads and the top thread will come right off. Also, when I stitch any ruffles/gathers I stitch it so that the flat side of the fabric is on top by the pressure foot and the gathers are next to the feed dogs.

And voila!


Now, there's a second type of ruffle... One that sits on top of your garment and has a cute perky ruffle at the top and a longer ruffle on the bottom. It looks really cute on the bottom of skirts.

First step is to finish all of your raw edges. Either turn and topstitch, roll hem, or serge. Then run double basting stitches at least 3/4" apart.

Then, gather it to fit your fabric or garment.

Make sure the edge of the fabric/garment you are attaching it to is finished as well.


Pin it to the fabric making sure that your basting stitches line up along the bottom edge of your fabric/garment.

Stitch two parallel lines making sure they fall between your basting stitches. Pull your basting stitches and and here's how it should look when it's done.

The biggest thing is to make sure that your seam allowance falls between your basting stitches. That's what will give you the nice even ruffles. I hope this is helpful for someone.